Assist in products selection

FGDC-T-250A-V-0.0M
22060000056

Charging device socket outlet for charging electric vehicles (EVs) with direct current (DC), compatible with the national standard DC vehicle charging device plug for installation in EVs

comparison

Products type

Only 4 products can be compared each time. Please select the products you want to replace.

    • Overview
    • Technical data
    • Accessories
    • Certification
    • Business data
    • Download

    Product certification

    Product advantages

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. 3D model
    2. Dimension
    3. Environmental conditions
    4. Electrical characteristics
    5. Mechanical properties
    6. Installation
    7. Marking material
    8. Locking device
    9. Temperature Sensor
    10. Environmental Product Compliance
    11. Cable

    3D model

    Dimension

    Depth84.2mm
    Hole diameter72 mm x 72 mm
    Wire length0m

    Environmental conditions

    Ambient temperature (operation) -30 °C ~ 50 °C
    Ambient temperature (storage / transport) -40 °C ~ 80 °C
    Maximum altitude5000m(Above sea level )
    IP classIP55(coupling)

    Electrical characteristics

    Maximum charge power250KW
    187KW
    Phase 3
    Power pin quantity9 (DC+,DC-,PE,A+,A-,S+,S-,CCS1,CCS2)
    Rated current of high-power contacts250
    Power contact rated voltage 750
    1000
    Quantity of signal contacts 4(S+,S-,CCS1,CCS2)
    Signal contact rated current 2
    Signal contact rated voltage 30
    Signal transmission type Pulse width adjustment
    Connection method precautions Crimp connection, cannot be disconnected
    Temperature measurement2x Pt 1000 (DIN EN 60751)
    PT1000

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force<140N
    Pull out force < 140N

    Installation

    Available installation locationInstallation in front of the board
    Limit of the installation location Only allow 0 to 90 degrees frontal tilt
    Mounting hole diameter 7.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basis Provided according to customer requirements
    Contact surface materialAg
    Marking material Plastic

    Locking device

    Lock type Secured by locking device after insertion

    Temperature Sensor

    StandardDIN EN 60751
    Recommended measured current 1 mA (1 V at 0°C )
    Recommendation to measure tolerance on current sensors±1K
    Temperature range _50 °C ... 150 °C
    Temperature coefficient (TCR) 3850 ppm/K
    Long-term stability(maximum R0-Drift) 0.06 % (After 1000 hours at 130°C )
    Shutdown temperature 90 °C Equivalent to Pt 1000 value 1346.5 Ω

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Cable

    Cable composition 2 x 80 mm² + 1 x 25 mm² + 2 × 4 mm² + 3× 0.75 mm²

    CQC parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 750V
    Rated current 250A
    IP class IP54
    Order number 22060000056
    Packing unit 5pcs/box
    Minimum order quantity 5
    Products weight (without packaging)
    3D
    FGDC-V.stp Download
    CAD Data
    FGDC-T-250A-V-03-0.0M-02A(H).dxf Download
    Data
    FGDC-T-250A-V-03-0.0M-02A(H).pdf Download
    Online consultation