- Overview
- Technical data
- Accessories
- Certification
- Business data
- Download
Product advantages
☑ The digital input module can receive control signals from on-site devices such as sensors.☑ 16 channel digital input, valid for PNP&NPN. Common end conversion
☑ Each input module is equipped with an anti-interference filter.
☑ Each input module comes with LED indicator lights.
☑ Isolation is achieved between the on-site layer and the system layer through optocouplers.
☑ Protection level IP20.
3D model
Technical Information
| OFF signal voltage | ＜ 5V DC |
| Hardware response time | 100us/100us |
| Reverse circuit protection | Yes |
| Error diagnosis | Yes |
| Working voltage | 24V DC+20%/-15% |
| ON signal voltage | ＞ 15V DC |
| Signal (0) input current of each channel (typical) | 0.678mA |
| Signal (1) maximum input current of each channel | 4.7mA |
| Line type | 1-wire system |
| Number of channels | 16 |
| Data size | 2 Byte |
| Signal type | NPN&PNP |
| Isolation method | Isolation from on-site optoelectronics |
| Filtering time | No filtering, 0.25ms, 0.5ms, 1ms (factory setting), 2ms, 4ms, 8ms, 16ms, 32ms, 2 sets of filtering parameters can be set, one set for every 8 channels, and the same filtering parameter can be shared within the group |
Environmental requirements
| Protection type | IP20 |
| working temperature | -25... 60 ℃ |
| Storage temperature | -40... 85 ℃ |
| relative humidity | 5... 95% RH (condensation) |
Wiring parameters
| The maximum crimping area of the wire | 1.5mm² |
| 0.14mm² | |
| Maximum crimping area of wire (AWG) | AWG16 |
| Connection technology: input/output | PUSH-IN type terminal blocks |
| Strip length | 8-10mm |
| Installation method | DIN-35 type guide rail |
| System feed current | <15mA |
| Order number | 30050002526 |
| Packing unit | 1 |
| Minimum order quantity | 1 |
| Products weight (without packaging) | 60g |
